Name | Location | Locator View | Connector End View |
---|---|---|---|
Body Control Module (BCM) | Lower rear of the IP, on the heater | Body Control System Component Views in Body Control System | -- |
Body Control Module (BCM) Connector C1 (BRN) (24 Cavities) | Lower rear of the IP, on the heater | Body Control System Component Views in Body Control System | Body Control System Connector End Views in Body Control System |
Body Relay Block | Right side of the IP, left of the IP fuse block | Power and Grounding Component Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
Data Link Connector (DLC) | Lower right of the IP | Data Link Communications Component Views in Data Link Communications | Data Link Communications Connector End Views in Data Link Communications |
Remote Control Door Lock Receiver (Japan) | On the right side IP sound insulator | ||
Remote Control Door Lock Receiver (UK/S. Africa) | Below the left IP, near the A-pillar | ||
Remote Control Door Lock Receiver Antenna (Japan) | In the right A-Pillar | ||
Underhood Fuse Block | On the top of the right inner fenderwell | Power and Grounding Component Views in Wiring Systems | -- |
Underhood Fuse Block Connector C1 (68 Cavities) (Body) | Below the underhood fuse block | Power and Grounding Component Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
Underhood Fuse Block Connector C2 (68 Cavities) (Engine) | Below the underhood fuse block | Power and Grounding Component Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
C203 (116 Cavities) | Body harness to IP harness, to the left of the IP | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
G105 | (CKT 451) At the engine harness, to the LR of the cylinder head | Harness Routing Views in Wiring Systems | -- |
G203 | (CKT 1050) At the body harness, to the right of the IP | Harness Routing Views in Wiring Systems | -- |
P100 | At the IP bulkhead pass-through to the RR of the engine compartment, on the cowl | Harness Routing Views in Wiring Systems | -- |
S152 | (CKT 351, CKT 451) In the engine harness, between the breakouts for the LR and the RR engine block grounds, 15 cm (5.9 in) from the breakout to the RR engine grounds | Harness Routing Views in Wiring Systems | -- |
S214 | (CKT 461) In the body harness, 4 cm (1.6 in) from the BCM connector breakout toward C203 | Harness Routing Views in Wiring Systems | -- |
S224 | (CKT 451) In the IP harness, between the breakouts for the BCM C3 and the radio connector, 19.5 cm (7.7 in) from the BCM C3 breakout | Harness Routing Views in Wiring Systems | -- |