GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2000 🢒 Blazer - 4WD - RHD 🢒 Steering 🢒 Steering Wheel and Column - Tilt 🢒 Turn Signal Cancel Cam and Upper Bearing Inner Race - Assemble - Off Vehicle

Tools Required

    • J 23653-SIR Steering Column Lock Plate Compressor
    • J 42137 Steering Column Lock Plate Compressor Adapter

    Object Number: 421396 Size: SH
  1. Lubricate the following parts with synthetic grease:
    2. • The lower brass surface of the turn signal cancel cam assembly (2)
    • The upper bearing inner race seat (4).
  2. Install the following parts onto the steering shaft assembly:
    3. 2.1. The upper bearing inner race seat (4)
    2.2. The upper bearing spring (3)
    2.3. The turn signal cancel cam assembly (2)
    2.4. The cancel cam orientation plate (1)

    Object Number: 330127 Size: SH
  3. Compress the cancel cam orientation plate using J 42137 and J 23653-SIR .
  4. Install the new bearing retainer (1) onto the steering shaft assembly.
  5. Firmly seat the bearing retainer (1) into the groove on the steering shaft assembly.
  6. Remove J 23653-SIR and J 42137 from the steering shaft assembly.
  7. Install the inflatable restraint steering wheel module coil. Refer to Inflatable Restraint Steering Wheel Module Coil Assemble - Off Vehicle .
  8. Enable the inflatable restraint steering wheel module. Refer to Enabling the SIR System in SIR.