Tools Required

J 41240 Fan Clutch Wrench

1. Remove the upper fan shroud. Refer to Fan Shroud Replacement .



2. Remove the fan clutch to the coolant pump drive pulley attaching nuts using J 41240 .
3. Separate the fan clutch assembly from the coolant pump drive pulley.
4. Remove the fan and the fan clutch as an assembly.



5. Remove the fan-to-fan clutch mounting screws.
6. Remove the fan from the clutch.

1. Install the fan to the fan clutch mounting.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Attach the fan to the clutch with the attaching screws.

Tighten
Tighten the screws to 33 N·m (24 lb ft).




3. Install the fan clutch to the coolant pump pulley using the J 41240.
4. Install the upper fan shroud. Refer to Fan Shroud Replacement .