Schematic Reference: Audible Warnings Schematics

Connector End View Reference: Instrument Panel, Gages, and Console Connector End Views

Did you perform the Diagnostic System Check - Vehicle?

Go to Step 2

Go to Diagnostic System Check - Vehicle

Turn ON the ignition.

Are any indicators/messages illuminated?

Go to Indicator/Warning Message Description and Operation

Go to Step 3

1. Turn OFF the ignition.
2. Turn the headlamp switch OFF.
3. Open the driver door.

Does the chime sound?

Go to Step 4

Go to Testing for Intermittent Conditions and Poor Connections

Replace the body control module (BCM). Refer to Control Module References for replacement, setup, and programming.

Did you complete the replacement?

Go to Step 5

--

1. Operate the system in order to verify the repair.
2. Clear all DTCs.

Did you correct the condition?

System OK

Go to Step 1