Tools Required

1. Remove the upper and lower trim covers. Refer to Steering Column Trim Cover Replacement - Off Vehicle .



2. Remove the blue (1), black (2), and gray (3) connectors of the turn signal and multifunction switch assembly.



3. Depress the tab on the cruise control switch assembly (2) and remove from the turn signal and multifunction switch assembly (1).



4. Remove the 2 pan head tapping screws (2).
5. Remove the turn signal and multifunction switch assembly (1).

Tools Required

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

1. Install the turn signal and multifunction switch assembly (1). Install the 2 pan head tapping screws (2).

Tighten
Tighten the screws to 7 N·m (62 lb in).




2. Slide the cruise control switch assembly (2) onto the turn signal and multifunction switch assembly (1).



3. Install the blue (1), black (2), and gray (3) connectors of the turn signal and multifunction switch assembly.
4. Install the upper and lower trim covers. Refer to Steering Column Trim Cover Replacement - Off Vehicle .