GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 1998 🢒 Seville - RHD 🢒 HVAC 🢒 HVAC Systems - Automatic 🢒 Blower Motor Control Module Replacement

Removal Procedure
  1. Remove the left closeout/insulator panel. Refer to Closeout/Insulator Panel Replacement - Left (RHD) in Instrument Panel, Gauges and Console.

    2. Object Number: 305751 Size: SH
  2. Remove the IP compartment. Refer to Instrument Panel Compartment Replacement in Instrument Panel, Gauges and Console.
  3. Remove the dash integration module (DIM) from the bracket.

    4. Lay aside the DIM.

  4. Remove the 2 rearward screws to the DIM bracket.
  5. Push the bracket downward.

    6. Object Number: 305753 Size: SH
  6. Disconnect the blower control module electrical connector.

    7. Object Number: 297075 Size: SH
  7. Remove the blower control module mounting screw.
  8. Remove the blower control module.

Installation Procedure

    Object Number: 297075 Size: SH
  1. Install the blower control module.
  2. Install the blower control module mounting screw.

    3. Object Number: 305753 Size: SH
  3. Connect the blower control module electrical connector.

    4. Object Number: 305751 Size: SH
  4. Push up the dash integration module (DIM) bracket to the original position.
  5. Install the 2 rear screws to the DIM bracket.
  6. Install the DIM to the bracket.
  7. Install the IP compartment. Refer to Instrument Panel Compartment Replacement in Instrument Panel, Gauges and Console.
  8. Install the left closeout/insulator panel. Refer toCloseout/Insulator Panel Replacement - Left (RHD) in Instrument Panel, Gauges and Console.