Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
DEFINITION: The LH front power window is inoperative. All other power windows operate correctly from left window switch and selected door switch. | ||||
1 | Was the Power Windows System Check performed? | -- | Go to Step 2 | |
2 |
Does the scan tool indicate that the switch is operating correctly? | -- | Go to Step 4 | Go to Step 3 |
3 | Replace the LH Front Power Window Switch. Refer to Front Door Switch Replacement . Is the repair complete? | -- | -- | |
4 |
Is the voltage within the specified range for both measurements? | 10-15 V | Go to Step 5 | Go to Step 6 |
5 | Replace the LH front power window motor. Refer to Power Window Motor Replacement . Is the repair complete? | -- | -- | |
6 |
Is the resistance within the specified range? | 0-5 ohms | Go to Step 8 | Go to Step 7 |
7 | Repair the open in CKT 165 (BRN). Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- | |
8 | Using a DMM, measure the resistance between window motor harness connector terminal B and door module harness connector C3 terminal C. Is the resistance within the specified range? | 0-5 ohms | Go to Step 10 | Go to Step 9 |
9 | Repair open in CKT 164 (DK BLU). Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- | |
10 | Replace the driver door module. Refer to Door Control Module Replacement . Is the repair complete? | -- | -- | |
