DEFINITION: The right front, left rear or right rear power window is inoperative, the left front power window functions properly.

Was the Power Windows System Check performed?

--

Go to Step 2

Go to Power Windows System Check

1. Connect a scan tool.
2. Select the data from the driver door module data list.
3. Operate the window switches at the malfunctioning door in the up and down directions.

Does the scan tool indicate that the switch operates correctly?

--

Go to Step 5

Go to Step 3

1. Disconnect the power window switch at the malfunctioning door.
2. Using a digital multimeter (DMM), measure the resistance between window switch terminal 2 and terminal 4 while pressing the switch in the down direction.
3. Using a DMM, measure the resistance between window switch terminal 1 and terminal 4 while pressing the switch in the up direction.

Is the resistance within the specified range for both measurements?

0-5 ohms

Go to Step 5

Go to Step 4

Replace the power window switch. Refer to Front Door Switch Replacement or Rear Side Door Window Switch Replacement .

Is the repair complete?

--

Go to Power Windows System Check

--

1. Disconnect the door module connector C1 at the malfunctioning door.
2. Using a DMM, measure the resistance between window switch harness connector terminal 4 and door module harness connector terminal 10.

Is the resistance within the specified range?

0-5 ohms

Go to Step 7

Go to Step 6

Repair the open in one of the following circuits:

Refer to Wiring Repairs in Wiring Systems.

Is the repair complete?

--

Go to Power Windows System Check

--

Using a DMM, measure the resistance between window switch harness connector terminal 1 and door module harness connector terminal 8.

Is the resistance within the specified range?

0-5 ohms

Go to Step 9

Go to Step 8

Repair the open in one of the following circuits:

Refer to Wiring Repairs in Wiring Systems.

Is the repair complete?

--

Go to Power Windows System Check

--

Using a DMM, measure the resistance between window switch harness connector terminal 2 and door module harness connector terminal 9.

Is the resistance within the specified range?

0-5 ohms

Go to Step 11

Go to Step 10

Repair the open in one of the following circuits:

Refer to Wiring Repairs in Wiring Systems.

Is the repair complete?

--

Go to Power Windows System Check

--

1. Disconnect the power window motor at the malfunctioning door.
2. Using a DMM, measure the voltage between window motor harness connector terminals while pressing the malfunctioning door window switch in the up and down directions.

Is the voltage within the specified range?

10-15 V

Go to Step 12

Go to Step 13

Replace the power window motor

Refer to Power Window Motor Replacement

Is the repair complete?

--

Go to Power Windows System Check

--

1. Disconnect the door module connector:

•	passenger door module connector C5

•	RH rear door module (RRDM) connector C3

•	LH rear door module (LRDM) connector C3

2. Using a DMM, measure the resistance in the malfunctioning door:

•	Passenger door module connector C5 terminal B, power window motor harness connector terminal A.

•	RRDM connector C3 terminal A, power window motor harness connector terminal B.

•	LRDM connector C3 terminal A, power window motor harness connector terminal B.

Is the resistance within the specified range?

0-5 ohms

Go to Step 15

Go to Step 14

Repair the open or short to ground in one of the following circuits:

Refer to Wiring Repairs in Wiring Systems.

Is the repair complete?

--

Go to Power Windows System Check

--

Using a DMM, measure the resistance in the malfunctioning door:

Is the resistance within the specified range?

0-5 ohms

Go to Step 17

Go to Step 16

Repair the open or short to ground in:

Refer to Wiring Repairs in Wiring Systems.

Is the repair complete?

--

Go to Power Windows System Check

--

Replace the door module at the malfunctioning door.

Refer to Door Control Module Replacement .

Is the repair complete?

--

Go to Power Windows System Check

--