Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Was Instrument Cluster System Check performed? | -- | Go to Step 2 | |
2 |
Does IP display switch from ENG to MET ? | -- | Go to Step 3 | |
3 |
Does the ENG/MET switch input toggle from ON to OFF when button is pressed? | -- | Go to Step 11 | Go to Step 4 |
4 | Inspect the DSPL mode button. Does the DSPL mode button work? | -- | Go to Step 5 | Go to Step 8 |
5 |
When the jumper is added and removed does the ENG/MET switch input toggle from ON to OFF? | -- | Go to Step 10 | Go to Step 6 |
6 | Inspect CKT 811 (LT BLU) for an open or short to ground. Was there a problem with CKT 811? | -- | Go to Step 7 | Go to Step 11 |
7 | Repair CKT 811 (LT BLU). Is the repair complete? | -- | -- | |
8 | Inspect CKT 351 (BLK/WHT) for an open. Was there a problem with CKT 351? | -- | Go to Step 9 | Go to Step 10 |
9 | Repair CKT 351 (BLK/WHT). Is the repair complete? | -- | -- | |
10 | Replace the LH IPC control (DIC) switch. Refer to Driver Information Display Switch Replacement . Is the repair complete? | -- | -- | |
11 | Replace the Instrument Cluster (IPC). Refer to Instrument Cluster Replacement . Is the instrument cluster (IPC) replacement complete? | -- | -- |
