1

1. Close all of the vehicle's doors.
2. Leave the safety belt unbuckled.
3. Verify the gear selector is in the PARK position.
4. Turn the ignition switch to the START position and then to the ON position. Do not start the engine.

A bulb check of the following indicators is performed (the indicators illuminate briefly)

2

1. Buckle the driver's safety belt.
2. Observe the fasten safety belt indicator.

The fasten safety belt indicator is off.

Fasten Safety Belt Indicator/Chime Always On

3

Apply the park brake.

The park brake indicator illuminates.

Brake Warning Indicator Inoperative

4

The turn signal indicators flash with turn signals.

5

1. Cover the ambient light sensor with a dark cloth.
2. Turn the headlamp switch to the HEAD position.

The IPC illumination turns on and dims to the setting on the dimmer control.

IPC illumination inoperative. Go to Interior Lights Dimming System Check

6

Adjust the instrument panel dimmer control.

The IPC illumination varies based on the dimmer control adjustment.

IPC illumination does not vary. Go to Interior Lights Dimming System Check

7

Turn the high beam headlamps on.

The high beam indicator illuminates.

8

Start the engine.

Engine does not start. Go to Vehicle Theft Deterrent (VTD) System Check

9

Press the IPC control button ENG/MET.

The measurement units change for the IPC and HVAC displays.

Instrument Panel Cluster Control Switch Inoperative - ENG/MET

10

Press the IPC control button DSPL MODE.

The digital and/or analog displays are activated or deactivated on the IPC.

Instrument Panel Cluster Control Switch Inoperative - DSPL MODE

11

Press the IPC control button RESET TRIP.

The active trip odometer (A or B) resets to zero.

Instrument Panel Cluster Control Switch Inoperative - RESET TRIP

12

Press the IPC control button TRIP A/B.

The IPC toggles between trip odometer A and B.

Instrument Panel Cluster Control Switch Inoperative - TRIP A/B

13

Press the IPC control button INFO up.

The DIC scrolls through the various status messages.

Instrument Panel Cluster Control Switch Inoperative - INFO Up

14

Press the IPC control button INFO down until MPH AVG is displayed on the DIC.

The DIC displays the MPH AVG message.

Instrument Panel Cluster Control Switch Inoperative - INFO Down

15

Press the IPC control button INFO RESET.

The MPH AVG value resets to zero.

Instrument Panel Cluster Control Switch Inoperative - INFO RESET

16

Press the IPC control button ON/OFF.

Changes features of program.

Instrument Panel Cluster Control Switch Inoperative - ON/OFF

17

Observe the fuel gauge.

The fuel gauge indicates the correct fuel level.

18

Observe the engine temperature gauge.

The engine temperature gauge indicates the correct engine temperature.

Engine Coolant Temperature Gage Inaccurate or Inoperative

19

Observe the tachometer.

The tachometer indicates the correct engine speed.

Tachometer Inoperative.

20

Observe the service engine soon indicator.

Service Engine Soon indicator is off.

Service Engine Soon indicator on. Go to Engine Controls Diagnostic System Check

21

Observe the engine oil pressure indicator.

The engine pressure oil indicator is off.

Engine Oil Pressure Message Always On..

22

Observe the battery charge indicator.

The battery charge indicator is off.

Charge Indicator Always On

23

Observe the Air Bag indicator.

The Air Bag indicator is off.

Air Bag indicator on, go to SIR Diagnostic System Check in SIR.

24

Observe the ABS indicator.

The ABS indicator is off.

ABS indicator on, go to ABS Diagnostic System Check in ABS.

25

Observe the traction control indicator (if equipped).

The traction control indicator is off.

Traction Control indicator on, go to ABS Diagnostic System Check in ABS.

26

Observe the engine coolant temperature indicator.

The engine coolant temperature indicator off.

Engine Coolant Indicator Always On.

27

Observe the SECURITY indicator.

The SECURITY indicator is off.

Security indicator on. Go to Vehicle Theft Deterrent (VTD) System Check

28

Cycle the gear selector lever through all of the gear positions.

The PRNDL displays the correct gear positions.

The park brake indicator turns off.

29

Drive vehicle at 48 km/h (30 mph).

The speedometer and the odometer operate properly.

Speedometer and/or Odometer Inoperative.

* Refer to the appropriate symptom diagnostic table for the applicable abnormal result.