Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the Seat Belt System Check? | -- | Go to Step 2 | Go to Seat Belt System Check |
2 |
Does the scan tool command the FASTEN SEAT BELTS Warning Indicator ON then OFF? | -- | Go to Step 4 | Go to Step 3 |
3 | Replace the Instrument Cluster (IPC). Refer to Instrument Cluster Replacement in Instrument Panel, Gauges and Console. Is the IPC replacement complete? | -- | Go to Seat Belt System Check | -- |
4 |
Is the resistance near the specified value? | 5 ohms | Go to Step 5 | Go to Step 7 |
5 | Test for proper terminal contact at the SDM connector. Refer to Testing for Intermittent Conditions and Poor Connections in Wiring Systems. Is the terminal contact OK? | -- | Go to Step 13 | Go to Step 6 |
6 | Repair the appropriate terminals. Refer to Connector Repairs in Wiring Systems. Is the repair complete? | -- | Go to Seat Belt System Check | -- |
7 | Connect a DMM between the SDM connector cavity 1 (BLK/WHT) and the LH seat belt switch connector cavity A (BLK/WHT). Is the resistance near the specified value? | 5 ohms | Go to Step 9 | Go to Step 8 |
8 | Repair the open in CKT 238 (BLK/WHT). Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Seat Belt System Check | -- |
9 | Connect a DMM between the SDM connector cavity 1 (BLK/WHT) and the LH seat belt switch connector cavity B (BLK). Is the resistance near the specified value? | 5 ohms | Go to Step 11 | Go to Step 10 |
10 | Test for proper terminal contact at the LH seat switch connector. Refer to Testing for Intermittent Conditions and Poor Connections in Wiring Systems. Is the terminal contact OK? | -- | Go to Step 12 | Go to Step 6 |
11 | Repair the open in CKT 850 (BLK). Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | Go to Seat Belt System Check | -- |
12 | Replace the LH front seat belt switch. Is the seat belt switch replacement complete? | -- | Go to Seat Belt System Check | -- |
13 | Replace the SDM. Refer to Inflatable Restraint Sensing and Diagnostic Module Replacement in SIR. Is the SDM replacement complete? | -- | Go to Seat Belt System Check | -- |
