Headlining Trim Panel Replacement DeVille
Removal Procedure
Important: Remove the rear vanity mirrors before you remove any other components
in order to avoid damage to the vehicle.
- Remove the rear vanity mirror assemblies, if equipped. Refer to
Vanity Mirror Replacement
.
- Remove the rear quarter trim panels. Refer to
Quarter Upper Trim Panel Replacement
.
- Remove the windshield pillar garnish moldings. Refer to
Windshield Pillar Garnish Molding Replacement
.
- Remove the body lock pillar trim panel. Refer to
Body Lock Pillar Trim Replacement
.
- Disconnect the electrical connector at the rear quarters.
- Remove the 4 passenger assist straps. Refer to
Assist Strap Replacement
.
- Remove the rear courtesy/reading lamp assemblies. Refer to
Roof Rail Rear Courtesy Lamp Replacement
in Lighting
Systems.
- Disengage the locator
by pulling down on the locator behind the attachment point at the rear (3).
- Position the seats fully rearward.
- Recline the seats.
- Remove the sunshade assemblies.
Sunshade Replacement
.
- Remove the rearview mirror assembly. Refer to
Inside Rearview Mirror Replacement
in Stationary Windows.
- Remove the overhead roof console. Refer to
Roof Console Replacement
.
- Release the tabs (3) that attach the roof console to the
support.
Notice: If the vehicle is equipped with rear vanity mirrors, the rear vanity
mirrors must be removed before the removal of the headliner or damage to the
roof may result.
- Remove the rear vanity mirrors. Refer to
Vanity Mirror Replacement
.
Important: Installation of a new cardboard roof insulator is necessary to ensure
the acoustical integrity of the roof system. Use GM P/N 12378192 Adhesive
available through General Motors Service Parts Operations.
- Pull the headliner down in order to release the headliner from the cardboard
roof damper.
- Pull downward the front of the headliner (1) (without a
sunroof) at the rear vanity mirror locations (5).
- Pull downward the front
of the headliner (1) (with a sunroof) at the auxiliary sunshade locations (5).
- Release the 2 clips from each sunshade.
- Release the hook and loop strips above the driver door and around
the sunroof opening, if equipped.
Notice: Use care when removing and installing the headliner. If reusing the headliner lay the headliner down flat on a clean surface. Excessive bending will
damage the headliner.
- Remove the headliner through the right front door, with the aid from
an assistant.
Installation Procedure
- Install the headliner
through the right front door, with the aid from an assistant.
- Engage the rear locator clips (2).
- Install the rear vanity mirrors (if equipped). Refer to
Vanity Mirror Replacement
.
- Press the rear vanity mirror clips into place (5).
- Attach the hook and loop strips above the driver door and around
the sunroof opening, if equipped.
- Install the rearview mirror assembly. Refer to
Inside Rearview Mirror Replacement
in Stationary Windows.
- Install the sunshade assemblies. Refer to
Sunshade Replacement
.
- Install the overhead console. Refer to
Roof Console Replacement
.
- Install the rear courtesy/reading
lamp assemblies. Refer to
Roof Rail Rear Courtesy Lamp Replacement
in Lighting Systems.
- Install the passenger assist strips. Refer to
Assist Strap Replacement
.
- Connect the electrical connectors (3).
- Install the body lock pillar trim panel. Refer to
Body Lock Pillar Trim Replacement
.
- Install the windshield garnish moldings. Refer to
Body Lock Pillar Trim Replacement
.
- Install the rear view mirror. Refer to
Inside Rearview Mirror Replacement
.
- Install the rear quarter trim panels. Refer to
Quarter Upper Trim Panel Replacement
.
Headlining Trim Panel Replacement Eldorado
Removal Procedure
- Remove both of the quarter
trim panels. Refer to
Quarter Upper Trim Panel Replacement
.
- Remove both of the windshield pillar garnish moldings. Refer to
Windshield Pillar Garnish Molding Replacement
.
- Remove both of the shoulder belts to headlining escutcheons. Refer
to
Seat Belt Replacement - Center
in
Restraints.
- Remove the electrical connectors (4) at the rear quarters.
- Remove the roof mounted lamps. Refer to
Roof Rail Rear Courtesy Lamp Replacement
in Lighting Systems.
- Remove the sunshades. Refer to
Sunshade Replacement
.
- Remove the overhead console. Refer to
Roof Console Replacement
.
- Remove the auxiliary sunshade supports.
- Pull down at the attachments in order to detach the hook and loop (4).
Important: Installation of a new cardboard roof insulator is necessary to ensure
the acoustical integrity of the roof system. Use GM P/N 12378192 Adhesive
available through General Motors Service Parts Operations.
- For vehicles without a sunroof, separate the headliner from the cardboard
roof dampener. The dampener is glued to the roof.
Notice: Use care when removing and installing the headliner. If reusing the headliner lay the headliner down flat on a clean surface. Excessive bending will
damage the headliner.
- Remove the headliner (1) through the right front door, with the
aid from an assistant.
Installation Procedure
Important: Do not pinch the vanity mirror wires when you install the sunshade support
fasteners.
- Complete the following steps with the aid from of an assistant:
1.1. | Install the headliner with the aid from an assistant. |
1.2. | Engage the locator at
the rear (2). |
- Install the interior roof mounted lamps. Refer to
Roof Rail Rear Courtesy Lamp Replacement
in Lighting Systems.
- Install the sunshades. Refer to
Sunshade Replacement
.
- Install the overhead console. Refer to
Roof Console Replacement
.
- Connect the electrical connectors (3) at the rear quarters.
- Install both of the shoulder belt to headlining escutcheons. Refer
to
Seat Belt Replacement - Center
in
Restraints.
- Install both of the windshield pillar garnish moldings. Refer
to
Windshield Pillar Garnish Molding Replacement
.
- Install the quarter trim panels. Refer to
Quarter Upper Trim Panel Replacement
.
Important: It is not necessary to glue the headliner to the cardboard roof dampener.
- Press the headliner (1) firmly at the hook and loop locations (4).