Sunshade Replacement DeVille

1. Press the outer edges of the escutcheon inboard in order to disengage the tabs. Pry the escutcheon away from the mounting bracket and remove the escutcheon.
2. Remove the fasteners (2) from the mounting bracket.
3. Pull down the sunshade in order to expose the connector.
4. Disconnect the electrical connector (3).
5. Remove the sunshade from the center receptacle.

1. Connect the electrical connector (3).
2. Push the connector and the wiring above the headliner.
3. Position the sunshade mounting bracket. Align the fastener holes.

Important: Do not pinch the wiring when you install the fasteners.

4. Install the fasteners (2) to the mounting bracket.
5. Install the sunshade to the center receptacle.

Sunshade Replacement Eldorado

1. Remove the fasteners (2) from the outboard bezel.
2. Pull down on the sunshade (4) until the connector is exposed.
3. Disconnect the electrical connector (3).
4. Remove the sunshade (4).
5. Remove the fastener that retains the center receptacle (2).

1. Install the fastener that retains the center receptacle (2).
2. Connect the electrical connector (3).
3. Push the electrical connector and the wiring above the headliner.
4. Position the sunshade outer bezel in place. Align the fastener holes.

Important: Do not pinch the wiring when you install the fasteners.

5. Install the fasteners (2) that attach the bezel.