- Remove the taillamp assemblies. Refer to
Tail Lamp Replacement
- Remove the rear compartment rear trim panel. Refer to
Rear Compartment Trim Panel Replacement
in Body
Rear End:
- Loosen the nuts that retain
the upper fascia (1).
- Loosen the bolts that retain the impact bar to the energy absorbers.
- Adjust the upper fascia
to the rear quarters.
Tighten
Tighten the nuts in sequence to 6 N·m (53 lb in).
- Align the lower fascia/impact bar (2) as needed.
Tighten
Tighten the bolts to 24 N·m (18 lb ft).
- Install the rear compartment trim panel. Refer to the following
procedures in Body Rear End:
- Install the taillamp assemblies. Refer to the following procedures
in Lighting Systems: