Step
| Action
| Normal Result(s)
| Abnormal Result(s)*
|
1
|
- Turn the ignition switch to the OFF position.
- Place the headlamp switch in the OFF position.
- Place the front fog lamps switch in the OFF position.
- Place the rear fog lamps switch in the OFF position.
| All of the
fog lamps are OFF.
|
|
2
|
- Turn the ignition switch to the RUN position.
- Place the front fog lamps switch in the ON position.
| Both of
the front fog lamps and the fog lamp indicator light.
|
|
3
| Pull
the multifunction lever (headlamp dimmer switch) in order to operate the flash-to-pass
function.
| When the multifunction lever is held in, the following actions occur:
• | Both of the front fog lamps turn OFF. |
• | The high beam headlamps turn ON. |
When the multifunction lever is released, the following actions occur:
• | The high beam headlamps turn OFF. |
• | Both of the front fog lamps turn ON. |
|
Headlight System Check
|
4
|
- Place the headlamp dimmer switch in the LOW position.
- Place the headlamp switch in the ON position.
- Place the rear fog lamps switch in the ON position.
| Both of
the rear fog lamps light. Both of the front fog lamps remain ON.
|
|
* Refer to the appropriate symptom diagnostic table for
the applicable abnormal result.
|