Disassembly Procedure
- Remove the steering column key lock cylinder set. Refer to
Steering Column Lock Cylinder Set - Disassemble - Off Vehicle
.
- Remove the column housing
cover end cap (2).
- Remove the cruise control connector (3) from the base plate (1)
and disconnect.
- Remove the 3 pan
head 6-lobed socket tapping screws: (1) at 12 o'clock, (2)
at 3 o'clock and (3) at 8 o'clock.
- Remove the lock housing cover assembly (1).
- Remove the column housing cover end base plate (2) and
the dimmer switch rod actuator (3).
- Remove the switch actuator
pivot pin (2).
- Remove the pivot and pulse switch assembly (1) from the
lock housing cover assembly.