GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 1999 🢒 Eldorado 🢒 Steering 🢒 Steering Wheel and Column - Tilt 🢒 Steering Column Lock Cylinder Set - Disassemble - Off Vehicle

Disassembly Procedure

    Important: The turn signal switch assembly does not have to be pulled through the column when removing unless necessary. Let the turn signal switch assembly hang freely after removal of the screws.

  1. Remove the turn signal switch assembly. Refer to Turn Signal and Multifunction Switch Assembly - Disassemble - Off Vehicle .
  2. Put the key in the LOCK position.

    3. Object Number: 343824 Size: SH
  3. Disconnect the steering column key lock cylinder set terminal connectors.
  4. Attach a wire to the terminal connectors. This will make installation easier.

    5. Object Number: 343829 Size: SH
  5. Remove the buzzer switch assembly (3).
  6. Remove the lock retaining screw (2).
  7. Remove the retaining clip (4) from the steering column lock cylinder set terminal connector (5).
  8. Remove the steering column lock cylinder set (1).
  9. Gently pull the terminal connectors (5) through the column.