Tools Required

J 38825 Pulley Remover

1. Remove the pump and reservoir assembly from the vehicle. Refer to Power Steering Pump Replacement .



2. Use the J 38825 in order to remove the pulley.

Tools Required

J 25033-C Pulley Installer

Important: Ensure that the face of the pulley hub is flush with the pump drive shaft. Do not use an arbor press in order to install the pulley.

1. Use the J 25033-C in order to install the pulley.
2. Install the pump and reservoir assembly into the vehicle. Refer to Power Steering Pump Replacement .