Did you perform the Diagnostic System Check - Instrument Cluster ?

--

Go to Step 2

Go to Diagnostic System Check - Instrument Cluster

Turn ON the ignition, with the engine OFF.

Is the charge indicator on?

--

Go to Intermittents and Poor Connections Diagnosis in Wiring Systems

Go to Step 3

Install a scan tool.

1. Turn ON the ignition, with the engine OFF.
2. View the IPC Data List Input ALT L TERMINAL on the scan tool.

Does the scan tool display ON?

--

Go to Step 5

Go to Step 4

1. Start the engine.
2. View the IPC Data List Input ALT L TERMINAL on the scan tool.

Does the scan tool display OFF?

--

Go to Step 4

Go to Generator Not Operating Properly

Replace the instrument cluster. Refer to Instrument Cluster Replacement in Instrument Panel, Gauges and Console.

Did you complete the repair?

--

Go to Step 6

--

Operate the system in order to verify the repair.

Did you correct the condition?

--

System OK

Go to Step 3