For 1990-2009 cars only
Removal Procedure
- Remove the front seat. Refer to Seat Replacement .
- Remove the front seat cushion outer finish panel. Refer to Seat Cushion Outer Trim Panel Replacement .
- Remove the seat memory module electrical connectors.
- Remove the anti-submarining switch electrical connector.
- Remove the seat adjuster. Refer to Power Seat Adjuster Mechanism Replacement .
- Remove the anti-submarining switch (1). Unhook anti-submarining switch from three places on the inner seat adjuster. Two at the top of the seat adjuster and one at the bottom.
Installation Procedure
- Install the anti-submarining switch (1).
- Hook anti-submarining switch to three places on the inner seat adjuster. Two at the top of the seat adjuster and one at the bottom.
- Install the seat adjuster. Refer to Power Seat Adjuster Mechanism Replacement .
- Install the anti-submarining switch electrical connector.
- Install the seat memory module electrical connectors.
- Install the front seat cushion outer finish panel. Refer to Seat Cushion Outer Trim Panel Replacement .
- Install the front seat. Refer to Seat Replacement .
- With the seat in the vehicle, check that the anti-submarining switch arms move up and down with the seat adjuster.
Important: The anti-submarining switch must be attached at all three places on the seat adjuster or the seat may be allowed to tilt too far forward during a collision, allowing the occupant to slide under the air bag.
