Schematic Reference: Wiper/Washer Schematics

Did you review the Wiper/Washer System Description and Operation and perform the necessary inspections?

Go to

Step 2

Go to

Symptoms - Wiper/Washer Systems

1. Turn the ignition on.
2. Turn the windshield wiper/washer switch to the off position.

Are the windshield washers always on?

Go to

Step 3

Go to

Testing for Intermittent Conditions and Poor Connections in Wiring Systems

1. Disconnect the windshield wiper/washer switch.
2. Turn the ignition on.

Are the windshield washers always on?

Go to

Step 4

Go to

Step 5

Repair the windshield washer switch signal circuit for a short to voltage. Refer to Wiring Repairs and Connector Repairs in Wiring Systems.

Is the repair complete?

Go to

Step 6

--

Replace the windshield wiper/washer switch. Refer to Windshield Wiper and Washer Switch Replacement - On Vehicle in Steering Wheel and Column-Tilt.

Is the repair complete?

Go to

Step 6

--

Operate the system in order to verify the repair.

Did you correct the condition?

System OK

Go to

Step 3