Removal Procedure
- Remove the right and/or left front seat belt retractor lower bolt .
- Remove the center pillar upper trim panel. Refer to Center Pillar Upper Trim Panel Replacement in Interior Trim.
- Remove the right and/or left front seat belt guide bolt from the guide height adjuster.
- Remove the right and/or left front seat shoulder belt guide height adjuster bolts (2, 3).
- Remove the right and/or left front seat shoulder belt guide height adjuster (1).
Installation Procedure
- Install the right and/or left front seat shoulder belt guide adjuster (1).
- Install the bolts (2, 3) to the right and/or left front seat shoulder belt guide adjuster (1).
- Install the right and/or left front seat shoulder belt to the guide bolt.
- Install the center pillar upper trim panel. Refer to Center Pillar Upper Trim Panel Replacement in Interior Trim.
- Install the right and/or left front lower seat belt bolt.
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the right and/or left front seat shoulder belt guide height
adjuster bolts to 10 N·m (89 lb in).
Tighten
Tighten the right and/or left front seat shoulder belt to guide bolt
to 35 N·m (26 lb ft).
Tighten
Tighten the right and/or left front lower seat belt retractor bolt to
35 N·m (26 lb ft).
