Internal defects in the sun roof actuator will set DTC 50, 51 or 55.
Sun roof actuator hardware failure (EEPROM, RAM or ROM are defective).
DTC 50, 51 or 55 will set and the sun roof actuator will become disabled.
• | DTC 50, 51 or 55 will clear when the fault is no longer present. |
• | DTC 50, 51 or 55 can be cleared by using the scan tool. |
Replace the sun roof actuator.
The number(s) below refer to the step number(s) on the diagnostic table.
This step replaces the sun roof actuator.
This step programs the sun roof actuator and also checks for any codes that may be present.
Step | Action | Value(s) | Yes | No |
---|---|---|---|---|
1 | Was the Power Sun Roof System Check performed? | -- | Go to Power Sunroof System Check . | |
Replace the sun roof actuator. Refer to Sunroof Actuator Replacement in Roof. Is the replacement complete? | -- | -- | ||
Are there any DTC's present? | -- | System OK |