GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 1998 🢒 Catera 🢒 Body and Accessories 🢒 Wipers/Washer Systems 🢒 Windshield Washer Solvent Container Replacement

Removal Procedure
  1. Raise the hood.
  2. Remove the front fascia. Refer to Front Bumper Fascia Replacement in Bumpers.
  3. Remove the front impact bar. Refer to Front Bumper Impact Bar Replacement in Bumpers.
  4. Remove the windshield washer motor from solvent container. Refer to Washer Pump Replacement

    5. Object Number: 159513 Size: SH
  5. Remove the solvent container bolts (4).
  6. Remove the solvent container (5).

Installation Procedure

    Object Number: 159513 Size: SH
  1. Install the solvent container.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the solvent container bolts (4).

    3. Tighten
    Tighten the solvent container bolts (4) untill fully seated but not stripped.

  3. Install the windshield washer motor from solvent container. Refer to Washer Pump Replacement
  4. Install the front impact bar. Refer to Front Bumper Impact Bar Replacement in Bumpers.
  5. Install the front fascia. Refer to Front Bumper Fascia Replacement in Bumpers.
  6. Close the hood.