GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the door trim panel. Refer to Rear Side Door Trim Panel Replacement .
  2. Remove the water deflector. Refer to Rear Side Door Water Deflector Replacement .
  3. Remove the inner belt sealing strip. Refer to Rear Door Window Belt Inner Sealing Strip Replacement .
  4. Remove the outer belt sealing strip. Refer to Rear Door Window Belt Outer Sealing Strip Replacement .
  5. Remove the door window weather strip. Refer to Front Side Door Window Weatherstrip Replacement .

  6. Object Number: 243362  Size: SH
  7. Remove the vent window and division channel screws.

  8. Object Number: 243364  Size: SH
  9. Pull the channel away from the window and the door.

  10. Object Number: 243368  Size: SH
  11. Remove the channel weatherstrip.
  12. Remove the door vent window.

Installation Procedure


    Object Number: 243368  Size: SH
  1. Install the vent window into the door.
  2. Install the vent window/division channel weatherstrip.

  3. Object Number: 243364  Size: SH
  4. Install the vent window/division channel through the door.
  5. Seat the channel on the window.

  6. Object Number: 243362  Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  7. Install the channel screws.
  8. Tighten
    Tighten the vent window screws to 7 N·m (62 lb in).

  9. Install the door window weather strip. Refer to door window weather replacement in this section.
  10. Install the outer belt sealing strip. Refer to Rear Door Window Belt Outer Sealing Strip Replacement .
  11. Install the inner belt sealing strip. Refer to Rear Door Window Belt Inner Sealing Strip Replacement .
  12. Install the water deflector. Refer to Rear Side Door Water Deflector Replacement .
  13. Install the door trim panel. Refer to Rear Side Door Trim Panel Replacement .