Step
| Action
| Value(s)
| Yes
| No
|
1
| Was the Power Mirrors System Check performed?
| --
|
Go to Step 2
| Go to
Outside Mirrors System Check
.
|
2
|
- Move the rocker switch to the LH side to choose the LH outside
rear view mirror.
- Disconnect the LH outside rear view mirror connector.
- Activate the outside remote control rear view mirror switch to
the left and then to the right.
- Use the DMM to measure the voltage between terminals 1 and 3 of
the LH outside rear view mirror connector.
Is the measured voltage within the specified value?
| B+
|
Go to Step 4
|
Go to Step
3
|
3
|
- Locate an open or a high resistance in circuits B2 and/or FA4.
- Repair the open or the high resistance in circuits B2 and/or FA4.
- Replace the outside remote control rear view mirror switch if
these circuits are OK. Refer to
Front Side Door Trim Panel Replacement
in Doors.
Is the repair or replacement complete?
| --
|
Go to Step 7
| --
|
4
|
- Activate the outside remote control rear view mirror switch upward
and downward.
- Use the DMM to measure the voltage between terminals 2 and 3 of
the LH outside rear view mirror connector.
Is the measured voltage within the specified value?
| B+
|
Go to Step 6
|
Go to Step
5
|
5
|
- Locate an open or a high resistance in circuits U1 and/or FA4.
- Repair the open or the high resistance in circuits U1 and/or FA4.
- Replace the outside remote control rear view mirror switch if
these circuits are OK. Refer to
Front Side Door Trim Panel Replacement
in Doors.
Is the repair or replacement complete?
| --
|
Go to Step 7
| --
|
6
| Replace the LH outside rear view mirror. Refer to
Power Mirror Replacement
in Doors.
Is the replacement complete?
| --
|
Go to Step
7
| --
|
7
|
- Connect all connectors and components that were disconnected.
- Verify that the LH outside rear view mirror operates properly.
Does the LH outside rear view mirror operate properly?
| --
| System OK
|
Go to Step 1
|
Step
| Action
| Value(s)
| Yes
| No
|
1
| Was the Power Mirrors System Check performed?
| --
|
Go to Step 2
| Go to
Outside Mirrors System Check
.
|
2
|
- Move the rocker switch to the RH side to choose the RH outside
rear view mirror.
- Disconnect the RH outside rear view mirror connector.
- Activate the outside remote control rear view mirror switch to
the left and then to the right.
- Use the DMM to measure the voltage between terminals 1 and 3 of
the RH outside rear view mirror connector.
Is the measured voltage within the specified value?
| B+
|
Go to Step 4
|
Go to Step
3
|
3
|
- Locate an open or a high resistance in circuits R11, R110, R4,
FA4, FA7 and/or FA700.
- Repair the open or the high resistance in circuits R11, R110,
R4 and/or FA4, FA7 and/or FA700.
- Replace the outside remote control rear view mirror switch if
these circuits are OK. Refer to
Front Side Door Trim Panel Replacement
in Doors.
Is the repair or replacement complete?
| --
|
Go to Step 7
| --
|
4
|
- Activate the outside remote control rear view mirror switch upward
and downward.
- Use the DMM to measure the voltage between terminals 2 and 3 of
the RH outside rear view mirror connector.
Is the measured voltage within the specified value?
| B+
|
Go to Step 6
|
Go to Step
5
|
5
|
- Locate an open or a high resistance in circuits P3, P30, P2, FA4,
FA7 and/or FA700.
- Repair the open or the high resistance in circuits P3, P30, P2,
FA4, FA7 and/or FA700.
- Replace the outside remote control rear view mirror switch if
these circuits are OK. Refer to
Front Side Door Trim Panel Replacement
in Doors.
Is the repair or replacement complete?
| --
|
Go to Step 7
| --
|
6
| Replace the RH outside rear view mirror. Refer to
Power Mirror Replacement
in Doors.
Is the replacement complete?
| --
|
Go to Step
7
| --
|
7
|
- Connect all connectors and components that were disconnected.
- Verify that the RH outside rear view mirror operates properly.
Does the RH outside rear view mirror operate properly?
| --
| System OK
|
Go to Step 1
|
