Removal Procedure
- Disable the SIR system If equipped with the SIR side impact system.
Refer to
Disabling the SIR System
in Restraints.
- Remove the front door trim panel. Refer to
Front Side Door Trim Panel Replacement
.
- Remove the front door water deflector. Refer to
Front Side Door Water Deflector Replacement
.
- Remove the Inflatable restraint side impact sensor mounting plate
if equipped. Refer to
SIR Sensor Mounting Plate Replacement - Front Door
.
- Remove the front door
check link to pillar bolt and nut.
- Remove the front door
check link to inner door bolts.
- Remove the front door check link from the door.
Installation Procedure
- Install the front door
check link to the door.
Notice: Use the correct fastener in the correct location. Replacement fasteners
must be the correct part number for that application. Fasteners requiring
replacement or fasteners requiring the use of thread locking compound or sealant
are identified in the service procedure. Do not use paints, lubricants, or
corrosion inhibitors on fasteners or fastener joint surfaces unless specified.
These coatings affect fastener torque and joint clamping force and may damage
the fastener. Use the correct tightening sequence and specifications when
installing fasteners in order to avoid damage to parts and systems.
- Install the front
door check link to inner door bolts.
Tighten
Tighten the front door to check link bolt 5 N·m 45 (lb in).
- Install the front door
check link to pillar nut and bolt.
Tighten
Tighten the front door check link to pillar nut and bolt to 5 N·m 45 (lb in).
- Install the Inflatable restraint side impact sensor mounting plate
if equipped. Refer to
SIR Sensor Mounting Plate Replacement - Front Door
.
- Install the front door water deflector. Refer to
Front Side Door Water Deflector Replacement
.
- Install the front door trim panel. Refer to
Front Side Door Trim Panel Replacement
.
- Enable the SIR system If equipped with the SIR side impact system.
Refer to
Enabling the SIR System
in Restraints.