Water Outlet Replacement LY7, LLT

1. Partially drain the cooling system. Refer to Cooling System Draining and Filling .
2. For the LLT engine, remove the throttle body. Refer to Throttle Body Assembly Replacement .
3. Remove the radiator hose from the water outlet. Refer to Radiator Inlet Hose Replacement .



4. Remove the water outlet housing bolts.
5. Remove the water outlet.
6. Remove and discard the water outlet seals.
7. Clean the water outlet housing sealing surfaces.

1. Install NEW water outlet housing seals.
2. Install the water outlet.

Notice: Refer to Fastener Notice in the Preface section.

3. Install the water outlet bolts.

Tighten
Tighten the water outlet housing bolts to 10 N·m(89 lb in).

4. Install the radiator hose to the water outlet. Refer to Radiator Inlet Hose Replacement .
5. For the LLT engine, install the throttle body. Refer to Throttle Body Assembly Replacement .
6. Fill the cooling system. Refer to Cooling System Draining and Filling .