GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
Cadillac
🢒
2004
🢒
CTS
🢒
Engine
🢒
Engine Cooling
🢒 Radiator Inlet Hose Replacement
Radiator Inlet Hose Replacement LY7
Tools Required
J 38185
Hose Clamp Pliers
Removal Procedure
Partially drain the cooling system. Refer to
Cooling System Draining and Filling
.
Position
J 38185
to the clamp in order to remove the inlet hose from the radiator.
Position
J 38185
to the clamp in order to remove the hose (1) from the engine.
Remove the inlet hose.
Installation Procedure
Install the radiator inlet hose into the vehicle with the mark in the top position.
Position
J 38185
to the clamp in order to connect the hose (1) to the engine.
Position the
J 37097-A
to the clamp in order to connect the hose to the radiator.
Fill the cooling system. Refer to
Cooling System Draining and Filling
.
Radiator Inlet Hose Replacement LA3, LY9
Tools Required
J 38185
Hose Clamp Pliers
Removal Procedure
Partially drain the cooling system. Refer to
Cooling System Draining and Filling
.
Position the
J 38185
to the clamp in order to remove the inlet hose (1) from the radiator.
Position the
J 38185
to the clamp in order to remove the hose (2) from the engine.
Remove the inlet hose.
Installation Procedure
Install the radiator inlet hose into the vehicle with the mark in the top position.
Position the
J 38185
to the clamp in order to connect the hose (2) to the engine.
Position the
J 37097-A
to the clamp in order to connect the hose (1) to the radiator.
Fill the cooling system. Refer to
Cooling System Draining and Filling
.
Radiator Inlet Hose Replacement LS6
Tools Required
J 38185
Hose Clamp Pliers
Removal Procedure
Partially drain the cooling system. Refer to
Cooling System Draining and Filling
.
Position
J 38185
to the clamp in order to remove the inlet hose from the radiator.
Position
J 38185
to the clamp in order to remove the hose (1) from the engine.
Remove the inlet hose.
Installation Procedure
Position the radiator inlet hose (1) into the vehicle.
Position
J 38185
to the clamp in order to connect the hose to the engine.
Position the
J 38185
to the clamp in order to connect the hose to the radiator.
Fill the cooling system. Refer to
Cooling System Draining and Filling
.