GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 105453  Size: SH
  1. Remove the door. Refer to Door Replacement .
  2. Remove the bolts (2).
  3. Remove the hinge from the body (1).

Installation Procedure


    Object Number: 105453  Size: SH
  1. Install the hinge to the body (1).
  2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the bolts.
  4. Tighten
    Tighten the bolts to 48 N·m (36 lb ft).

  5. Install the door to the hinge. Refer to Door Replacement .
  6. Tighten
    Tighten the bolts to 48 N·m (36 lb ft).

  7. Inspect the door for proper alignment.
  8. Perform the following steps in order to adjust the door:
  9. 5.1. Loosen the bolts.
    5.2. Shift the door as necessary.

    Tighten
    Tighten the bolts to 48 N·m (36 lb ft).