Step
| Action
| Normal Result(s)
| Abnormal Result(s)*
|
1
|
- Turn the ignition switch to the RUN position.
- Wait 10 seconds.
- Inspect the SECURITY indicator.
| The SECURITY indicator
is OFF.
|
SECURITY Indicator Always On or Flashing
|
2
|
- Turn the ignition switch to the START position.
- Release the ignition switch to the RUN position.
|
• | The SECURITY indicator turns OFF 5 seconds after the engine
starts. |
|
• | The SECURITY indicator is OFF. The engine cranks but does not
start. Refer to
Ignition System Check
in Engine Electrical. |
|
* Refer to the appropriate symptom diagnostic table for the applicable
abnormal result.
|