GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Turn the ignition OFF.

  2. Object Number: 1949767  Size: SH
  3. Remove the camshaft position (CMP) sensor electrical connector (1) from the CMP sensor (2).

  4. Object Number: 1949769  Size: SH
  5. Remove the the CMP sensor to engine front cover retaining bolt (1).
  6. Remove the CMP sensor from the engine front cover (2).

Installation Procedure


    Object Number: 1949769  Size: SH
  1. Install the CMP sensor (2) to the engine front cover.
  2. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the CMP sensor to engine front cover retaining bolt (1).
  4. Tighten
    Tighten the bolt to 10 Nยทm (89 lb in).


    Object Number: 1949767  Size: SH
  5. Install the CMP sensor electrical connector (1) to the CMP sensor.