GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2008 🢒 VUE - FWD 🢒 Bulletins 🢒 EI08308 - SES Light On, DTC P069E, Extended Crank Time, Fuel Pump Control Module (Engineering Information)

EI08308 - SES Light On, DTC P069E, Extended Crank Time, Fuel Pump Control Module (Engineering Information)

Subject:EI08308 - SES Light On, DTC P069E, Extended Crank Time, Fuel Pump Control Module (Engineering Information)

Models:2008-2009 Saturn VUE

Attention: For dealers in US and Canada Only- proceed with this bulletin ONLY if the customer has commented about this concern AND the EI number is listed in GMVIS. If the customer has not commented about this condition or the EI does not show in GMVIS, disregard this bulletin and proceed with diagnostics found in published Service Information. THIS IS NOT A RECALL - refer to Service Bulletin 04-00-89-053B for more details on the use of Engineering Information bulletins.

Condition

Some customers may comment that the vehicle has an extended crank time or the check engine light is on. Upon investigation, the technician may find DTC P069E set as current or history, alone or in combination with the other codes in the engine control module (ECM).

Cause

GM Engineering is attempting to determine the root cause of concerns for DTC P069E. GM has a need to obtain technical information first hand from the dealer technician during diagnosis and PRIOR to repair. As a result, this information will be used by engineering to help root-cause the customer's concern and develop/validate a field fix.

Correction

Technicians are to capture the freeze frame data from the fuel pump control module and engine control module and contact the engineer.

  1. Verify that the VIN and mileage are correct on the repair order.
  2. Verify DTC P069E is set as current or in history. If there is no DTC P069E, this bulletin does not apply. Refer to Service Information for further diagnosis and repair.
  3. Capture the freeze frame data from the FPCM (fuel pump control module) and the ECM (engine control module).

    4. E-mail the freeze frame data to [email protected]. Refer to Corporate Bulletin Number 07-07-30-010 for more information on how to capture and e-mail data via TIS2WEB® software.

  4. For dealers located within three hours of the Metro Detroit area, prior to making any repairs, call Angelina Kretz at 248-497-5548. Engineering may want to visit your dealer.

    5. If you do not hear from engineering within one hour, continue to repair the vehicle per SI.

Warranty Information

For vehicles repaired under warranty, use:

Labor Operation

Description

Labor Time

J7812*

Fuel System - Engineering Information

0.4 hr

*This is a unique labor operation for bulletin use only. It will not be published in the Labor Time Guide.