GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 1832382  Size: SH
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Place a drain pan under the oil pan drain plug.
  3. Remove the oil pan drain plug (1). Allow the oil to drain completely.
  4. Notice: Refer to Fastener Notice in the Preface section.

  5. Install the oil pan drain plug (1).
  6. Tighten
    Tighten the drain plug to 20 N·m (15 lb ft).


    Object Number: 1832415  Size: SH
  7. Place the drain pan under the oil filter.
  8. Remove the oil filter. Allow the oil to drain completely.

Installation Procedure


    Object Number: 1832415  Size: SH
  1. Lubricate the NEW oil filter gasket with clean engine oil.
  2. Tighten the oil filter.
  3. Tighten
    Tighten the filter to 30 N·m (22 lb ft).

  4. Lower the vehicle.
  5. Fill the engine with oil to the appropriate mark.
  6. Start the engine and inspect for leaks.