⢠| Remove the lower bolt from the fixed glass post. |
⢠| Disengage the fixed glass post upper clip from the door frame by using a small screwdriver to press up on the clip. |
⢠| Depress the mushroom retainers at the top ends of the metal glass run channels. |
⢠| Remove the seal leg from the front metal glass run channel. |
⢠| Starting from the front corner of the door, remove the seal from the door header flange. |
⢠| Remove the seal and fixed glass assembly from the door. |
⢠| Place the seal and fixed glass assembly into the door frame. |
⢠| Place the seal assembly on the door header. |
⢠| Install the fixed glass post upper clip to the door frame. |
⢠| Install the front seal leg to the metal glass run channel. |
⢠| Secure the mushroom retainers at the top ends of the metal glass run channels. |
⢠| Install the seal to the door header flange, starting from the front corner. |
Notice: Refer to Fastener Notice in the Preface section.
⢠| Install the lower fixed glass post bolt. |
Tighten
Tighten the bolt to 10 NĀ·m (89 lb in).