Removal Procedure
- Remove the HVAC module. Refer to
HVAC Module Assembly Replacement.
- Disconnect the electrical connector from the recirculation actuator.
- Remove the recirculation actuator screws.
- Remove the recirculation actuator.
- Remove the air inlet assembly screws.
- Remove the air inlet assembly.
Installation Procedure
- Install the air inlet assembly.
Caution: Refer to Fastener Caution in the Preface section.
- Install the air inlet assembly screws.
Tighten
Tighten the screws to 1.5 N·m (13 lb in).
- Install the recirculation actuator.
- Install the recirculation actuator screws.
Tighten
Tighten the screws to 1.5 N·m (13 lb in).
- Install the electrical connector to the recirculation actuator.
- Install the HVAC module. Refer to
HVAC Module Assembly Replacement.