| Table 1: | Indicators |
| Table 2: | DIC Warning Messages |
Symbol | Reference |
|---|---|
| |
| Air Bag: SIR System Description and Operation |
| Auto Stop: Hybrid Modes of Operation Description - HP5 or Starter/Generator Description and Operation - HP7 |
| AWD Disabled: All-Wheel Drive Description and Operation |
| |
(Export) BRAKE | |
| Change Engine Oil: The IPC) displays this indicator when the ECM determines that the engine oil life is below 5 percent. After the oil is changed, reset the engine oil monitor. Refer to GM Oil Life System Resetting. |
|
| |
| |
[DOOR AJAR] | Door Ajar: Power Door Locks Description and Operation |
| |
| Engine Coolant Temperature: Cooling System Description and Operation |
ESP OFF | ESP OFF: ABS Description and Operation |
ESP ACTIVE | ESP ACTIVE: ABS Description and Operation |
ESP NOT READY | ESP NOT READY: ABS Description and Operation |
| Fasten Seat Belt: Seat Belt System Description and Operation |
| Fasten Passenger Seat Belt: Seat Belt System Description and Operation |
| Front Fog Lamps: Exterior Lighting Systems Description and Operation |
| High Beam: Exterior Lighting Systems Description and Operation |
| Hill Start Assist: Hill Hold Control Description and Operation |
| Hybrid Fuel Economy: The hybrid fuel economy indicator notifies the driver when the vehicle is achieving a better than normal fuel economy. The indicator illuminates in the IPC when the ECM detects the vehicle fuel economy is better than normal and sends a serial data message to the IPC to turn the indicator ON. The indicator can be disabled and enabled using the DIC switch. |
| Liftgate Ajar: Rear Hatch/Gate Description and Operation |
| Low Fuel: The instrument panel cluster (IPC) illuminates the Low Fuel indicator when the IPC detects that the fuel level is less than a pre-determined value. |
| Low Oil Level: The instrument panel cluster (IPC) illuminates the Low Oil Level indicator when the ECM detects that the engine oil level is less than a pre-determined value. |
| Low Oil Pressure: The IPC displays the engine oil pressure indicator when the ECM determines that the engine oil pressure is low from the engine oil pressure switch. |
| MIL: Engine Control Module Description for the 2.4L engine, Engine Control Module Description for the 3.5L engine, Engine Control Module Description for the 3.6L (LY7) engine or Engine Control Module Description for the 3.6L (LCS) engine |
| Passenger Air Bag Off: SIR System Description and Operation |
| Passenger Air Bag On: SIR System Description and Operation |
| Reduced Engine Power: Throttle Actuator Control (TAC) System Description for the 2.2L or 2.4L engine, Throttle Actuator Control (TAC) System Description for the 3.5L engine, Throttle Actuator Control (TAC) System Description for the 3.6L (LY7) engine or Throttle Actuator Control (TAC) System Description for the 3.6L (LCS) engine |
| Regenerative Braking: Hybrid Modes of Operation Description - HP5 |
| Security: Content Theft Deterrent (CTD) Description and Operation |
| Service AWD: All-Wheel Drive Description and Operation |
| Service Vehicle Soon: The IPC displays the indicator when the ECM or BCM detects certain vehicle malfunctions that are not related to the emissions system. |
| Speed Sensitive Power Steering: Power Steering System Description and Operation |
| Tire Pressure Monitor: Tire Pressure Monitor Description and Operation |
| Turn Signals: Exterior Lighting Systems Description and Operation |
| Upshift Indicator: The IPC displays the indicator when the ECM detects that the manual transmission needs to be shifted to a higher gear. |
| Vehicle Dynamics Caution (VDC): ABS Description and Operation |
| Vehicle Ready: Hybrid Modes of Operation Description - HP5 |
| Washer Fluid Level: Wiper/Washer System Description and Operation |
Message | Reference |
|---|---|
ALL WHEEL DRIVE OFF | |
BATTERY SAVER ACTIVE | |
BRAKE FLUID LOW | |
BUCKLE PASSENGER SEAT BELT | |
BUCKLE SEATBELT | |
CALIBRATION COMPLETE | When the compass calibration process is complete and successful, the DIC displays CALIBRATION COMPLETE.. |
CALIBRATING: DRIVE IN CIRCLES | The DIC provides the display that allows the resetting of the currently stored compass calibrations data and establish new calibration data. When the compass calibration is in process, the DIC displays CALIBRATING: DRIVE IN CIRCLES. Refer to Compass Calibration and Magnetic Variance |
CHANGE ENGINE OIL SOON | The DIC displays this message when the ECM determines that the engine oil needs to be changed. After the oil is changed, reset the engine oil monitor. Refer to GM Oil Life System Resetting |
CHANGE TRANSMISSION FLUID | Transmission Indicators and Messages for the 6T70/6T75 or Transmission Indicators and Messages for the 2MT70 |
CHECK TIRE PRESSURE | |
CHECK LEFT FRONT TIRE PRESSURE | |
CHECK LEFT REAR TIRE PRESSURE | |
CHECK RIGHT FRONT TIRE PRESSURE | |
CHECK RIGHT REAR TIRE PRESSURE | |
COOLANT LEVEL LOW ADD COOLANT | |
CRUISE SET TO XXX | |
DRIVER DOOR OPEN | |
ENGINE HOT A/C OFF | |
ENGINE OVERHEATED-IDLE ENGINE | |
ENGINE OVERHEATED STOP ENGINE | |
ENGINE POWER REDUCED | Throttle Actuator Control (TAC) System Description for the 2.2L or 2.4L engine, Throttle Actuator Control (TAC) System Description for the 3.5L engine, Throttle Actuator Control (TAC) System Description for the 3.6L (LY7) engine or Throttle Actuator Control (TAC) System Description for the 3.6L (LCS) engine |
FUEL LEVEL LOW | The DIC displays this message when the instrument panel cluster (IPC) determines that the fuel level is less than a predetermined value. |
HOOD OPEN | |
ICE POSSIBLE DRIVE WITH CARE | The DIC displays this message for 10 seconds when the outside air temperature drops below 2.0°C (36°F). |
JUMP ASSIST ACTIVE | |
JUMP ASSIST ABORTED | |
JUMP ASSIST DONE: TURN KEY TO START | |
JUMP ASSIST READY: TURN KEY TO OFF | |
JUMP ASSIST REQUIRED | |
LIFT GATE OPEN | |
OIL PRESSURE LOW STOP ENGINE | The DIC displays this message when the ECM detects a low engine oil pressure condition from the engine oil pressure (EOP) switch. |
PASSENGER DOOR OPEN (Front and Rear) | |
PROGRAM CLUSTER | The DIC displays this message when the IPC requires programming. |
REMOTE KEY LEARNING ACTIVE | |
REMOTE KEY LEARNING COMPLETE | |
REPLACE BATTERY IN REMOTE KEY | |
SERVICE A/C SYSTEM | |
SERVICE AIR BAG | |
SERVICE ALL WHEEL DRIVE | |
SERVICE BATTERY CHARGING SYSTEM | |
SERVICE BRAKE SYSTEM | |
SERVICE BRAKE SOON | |
SERVICE COLUMN LOCK | |
SERVICE HILL START ASSIST | |
SERVICE HYBRID SYSTEM | High Voltage Monitoring Systems Description - HP5 or Starter/Generator Description and Operation- HP7 |
SERVICE POWER STEERING | |
SERVICE STABILITRAK | |
SERVICE THEFT DETERENT SYSTEM | |
SERVICE TRACTION CONTROL | |
SERVICE VEHICLE SOON | The DIC displays this message when the BCM detects certain malfunctions that are not related to the vehicle emission system. |
SERVICE TRANSMISSION | Transmission Indicators and Messages for the 6T70/6T75 or Transmission Indicators and Messages for the 2MT70 |
SHIFT DENIED | Automatic Transmission Shift Lock Control Description and Operation |
SPEED LIMITED TO XXX | |
SPEED SENSITIVE POWER STEERING | |
STABILITRAK NOT READY | |
STABILITRAK OFF | |
STARTING DISABLED SERVICE THROTTLE | |
TIGHTEN GAS CAP | Evaporative Emission Control System Description for the 2.2L or 2.4L engine, Evaporative Emission Control System Description for the 3.5L engine, Evaporative Emission Control System Description for the 3.6L (LY7) engine or Evaporative Emission Control System Description for the 3.6L (LCS) engine |
TIRE LEARNING ACTIVE | |
TRACTION CONTROL OFF | |
TRACTION CONTROL ON | |
TRANSMISSION HOT: IDLE ENGINE | Transmission Indicators and Messages for the 6T70/6T75 or Transmission Indicators and Messages for the 2MT70 |
TURN SIGNAL ON |
