GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Saturn 🢒 2009 🢒 VUE - AWD 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Ignition Coil Replacement - Bank 2

Removal Procedure

    Object Number: 1889243 Size: SH
  1. Remove the air fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement.
  2. Disconnect the engine wiring harness electrical connectors (1) from the ignition coils.

    3. Object Number: 1889253 Size: SH
  3. If removing the #6 ignition coil (1), disconnect the positive crankcase ventilation (PCV) fresh air line (2) from the camshaft cover.

    4. Object Number: 868186 Size: SH
  4. Remove the ignition coil bolts.
  5. Remove the ignition coils.

Installation Procedure

    Object Number: 860797 Size: SH
  1. Install the ignition coils.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the ignition coil bolts. Tighten the bolts to 10 N·m (89 lb in).

    3. Object Number: 1889253 Size: SH
  3. If the #6 ignition coil (1) was removed, connect the PCV fresh air line (2) to the camshaft cover.

    4. Object Number: 1889243 Size: SH
  4. Connect the engine wiring harness electrical connectors (1) to the ignition coils.
  5. Install the air fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement.