Oil Filter Adapter Installation LY7

1. Position a NEW oil filter adapter gasket onto the oil filter adapter.



2. Install the oil filter adapter bolts into the oil filter adapter.
3. Install the oil filter adapter.

Caution: Refer to Fastener Caution in the Preface section.

4. Tighten the oil filter adapter bolts into the engine block and tighten to 23 N·m (17 lb ft).



5. Install a NEW oil filter.

Oil Filter Adapter Installation LCS

1. Position a NEW oil filter adapter gasket onto the oil filter adapter.



2. Install the oil filter adapter bolts (1, 2) into the oil filter adapter.
3. Loosely tighten the oil filter adapter bolts (1, 2).
4. Install and loosely tighten the oil filter adapter bolt (3) into the oil filter adapter.

Caution: Refer to Fastener Caution in the Preface section.

5. Tighten the oil filter adapter bolts (1, 2, 3) into the engine block in the sequence shown to 23 N·m (17 lb ft).



6. Install a NEW oil filter cartridge.




Caution: Lubrication must be applied to the threads of the oil filter cap prior to installation. Failure to lubricate the oil filter cap threads can hinder later removal and cause possible oil filter cap damage.

7. Lubricate the oil filter cap threads with clean engine oil.




Caution: Proper oil filter cap tightening is mandatory. Failure to tighten the oil filter cap to the proper specification can hinder later removal and cause possible oil filter cap damage.

8. Install the oil filter cap and tighten to 25 N·m (18 lb ft).