For 1990-2009 cars only
- Position a NEW exhaust manifold gasket onto the left exhaust manifold.
- Install the exhaust manifold bolts into the left exhaust manifold.
- Place the left exhaust manifold, exhaust manifold gasket and bolts as an assembly in position on the left cylinder head.
- Install the exhaust manifold bolts into the left cylinder head and tighten to 25 N·m (18 lb ft).
- Install the engine coolant temperature (ECT) sensor and tighten to 30 N·m (22 lb ft).
- Place the left exhaust manifold heat shield in position.
- Install the left exhaust manifold heat shield bolts and tighten to 10 N·m (89 lb in).
- Install the left torque strut bracket.
- Install the left torque strut bracket bolts and tighten to 50 N·m (37 lb ft).
Caution: Refer to Fastener Caution in the Preface section.
