Special Tools
J 46104 Water Pump Pulley Holding Tool
EN 46104
For equivalent regional tools, refer to
Special Tools.
- Ensure that the engine front cover and water pump are clear of old gasket material.
- Place a new water pump gasket on the water pump.
- Place the water pump in position on the front cover.
Caution: Refer to Fastener Caution in the Preface section.
- Install the water pump bolts and tighten to
10 N·m (89 lb in).
- Install the water pump pulley.
- Loosely install the water pump pulley bolts.
- Install the
J 46104 tool
onto the water pump pulley and tighten the water pump pulley bolts to
10 N·m (89 lb in).