For 1990-2009 cars only
- Mark bearing caps to ensure they are installed in the same position.
- Remove the exhaust camshaft bearing cap bolts.
- Remove the camshaft bearing caps ensuring they are marked and refitted in same position on assembly.
- Remove the exhaust camshaft.
- Remove the exhaust camshaft roller finger followers.
- Remove the hydraulic element adjusters.
Important: Remove each bolt on each cap one turn at a time until there is no spring tension pushing on the camshaft.
Important: Keep all of the roller finger followers and hydraulic element adjusters in order so that they can be reinstalled in their respective locations.
