- Make sure that the oil pan and mounting
surface on the lower crankcase are free of all oil and debris.
- Apply a 2 mm bead of RTV P/N 21019581, around
the perimeter of the oil pan and the oil suction port opening. Do not over
apply the RTV. More than a 2 mm bead is not required.
- Install the oil pan.
Notice: Refer to Fastener Notice in the Preface section.
- Install the oil pan bolts hand tight.
Tighten
Tighten the oil pan bolts to 25 N·m (18 lb ft)
in sequence.