Preliminary Procedures

1. Remove the fuse labeled HVAC CTRL (BATT).
2. Remove the instrument panel (I/P) carrier. Refer to Instrument Panel Carrier Replacement .
3. Disconnect the recirculation actuator electrical connector.

1

Recirculation Housing Screw (Qty: 4)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
2 N·m (18 lb in)

2

Recirculation Housing

3

Recirculation Actuator Screw (Qty: 3)

Tighten
2 N·m (18 lb in)

4

Recirculation Actuator

Procedure