Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

1

Rear License Plate Lamp Assembly Screws (Qty: 2)

Tighten
2 N·m (18 lb in)

2

Rear License Plate Lamp Assembly

Tip
Push one side of the lamp assembly inside the rear bumper cover hole and pull downward to disconnect the electrical connector.

3

Rear License Plate Electrical Connector

Tip
Twist the socket counterclockwise in order to remove from the lamp housing.

4

Rear License Plate Assembly Bulb