Preliminary Procedures

1. Remove the instrument panel (I/P) compartment. Refer to Instrument Panel Compartment Replacement .
2. Disconnect the blower motor resistor electrical connector.

1

Blower Motor Resistor Screw (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
1.5 N·m (13 lb in)

2

Blower Motor Resistor

3

Blower Motor Screw (Qty: 3)

Tighten
1.5 N·m (13 lb in)

4

Blower Motor Assembly