GM Service Manual Online
For 1990-2009 cars only

Rear License Plate Lamp Replacement Sedan

Removal Procedure


    Object Number: 892645  Size: SH
  1. Remove the license lamp screws on each side.
  2. Pull the lamp down.

Installation Procedure


    Object Number: 892645  Size: SH
  1. Install the license lamp by positioning the lens into the opening.
  2. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the license lamp screws on each side.
  4. Tighten
    Tighten the screws to 2 N·m (18 lb in).