Removal Procedure
- Remove the radio. Refer to
Radio Replacement
.
- Disconnect the electrical connectors from the rear-seat audio tee (RSAT) module.
- Remove the double-sided tape from the back of the RSAT module (1) using a plastic flat-bladed tool.
- Remove the RSAT module from the vehicle.
- Remove all of the adhesive residue by using a razor knife and an isopropyl alcohol.
Installation Procedure
Important: Verify that all of the adhesive has been removed from the vehicle mounting surface.
- Apply a double-sided tape to the RSAT module (1).
- Install the RSAT module to the vehicle.
- Connect the electrical connectors to the RSAT module.
- Install the radio. Refer to
Radio Replacement
.