| Table 1: | Body Control Module (BCM) |
| Table 2: | Instrument Panel Cluster (IPC) |
Scan Tool Output Control | Additional Menu Selection(s) | Description |
|---|---|---|
I/P Illumination Lamps | Output Control/Lamp Test | The IPC from 0-100% when you select INCREASE or DECREASE by 20% increments. |
Key Minder | Output Control/Chime Test | The BCM turns the key in ignition reminder chime on when you select ON. The key in ignition reminder chime should stay on until commanded OFF. |
Lights On Minder | Output Control/Chime Test | The BCM turns the lights on reminder chime on when you select ON. The lights on reminder chime should stay on until commanded OFF. |
Occupant Restraint | Output Control/Chime Test | The BCM turns the fasten safety belt chime on when you select ON. The fasten safety belt chime should stay on until commanded OFF. |
Scan Tool Output Control | Additional Menu Selection(s) | Description | ||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Lamp and Gauge Check | -- | The IPC illuminates the following indicators when you select ON:
The IPC drives the following gages to maximum position when you select ON:
The indicators should stay illuminated and all gages remain at maximum until commanded OFF. When commanded OFF, the indicators should turn OFF and all gages should remain at the minimum position until the test is exited or commanded ON. |
