GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 893742  Size: SH
  1. Remove the rear door trim panel. Refer to Door Trim Panel - Rear Removal.
  2. Remove the rear portion of the water deflector.

  3. Object Number: 897170  Size: SH
  4. Partially remove the inner and outer weather-strip from the rear of door only.

  5. Object Number: 893633  Size: SH
  6. Remove the rear window run channel.
  7. Run window to 3/4 up position.

  8. Object Number: 893704  Size: SH
  9. Remove the latch/lock mechanism from the door.
  10. Remove the power door lock electrical connector and the 2 lock rods from the latch mechanism.

Installation


    Object Number: 893704  Size: SH
  1. Install the power door lock electrical connector and the 2 lock rods to the latch mechanism.
  2. Install the latch/lock mechanism to the door.
  3. Tighten the top screw first, bottom screw second, and middle screw last.
  4. Tighten
    Tighten the door latch-to-door bolts to 10 N·m (89 lb in).

  5. Run window to 3/4 up position.

  6. Object Number: 893633  Size: SH
  7. Install the rear window run channel. Tighten the bolts.
  8. Tighten
    Tighten the rear window run change bolts to 10 N·m (89 lb in).


    Object Number: 897170  Size: SH
  9. Install the inner and outer weather-strip.

  10. Object Number: 893742  Size: SH
  11. Install the rear portion of the water deflector.
  12. Install the door trim panel. Refer to Door Trim Panel - Rear Installation.